PRG, Inc. - JP-1257

JP-1257 Anchoring Epoxy

Borates

Cleaners &
Finish Removal

Scanning &
Documentation

Product Description

A low odor, 100% solids, two-component, structural epoxy designed for use in anchoring threaded rod, bolts, reinforcing bars and smooth dowels in solid wood.

A thixotropic, amine based adhesive that exhibits excellent adhesion and fast setting characteristics. It can be used vertically, horizontally or with anchoring.

Advantages / Features

I.C.B.O.

Meets ASTM C-881-90 Type IV & V, Grade 3, Class B & C

Low Odor

Rapid Cure

100% Solids - No Solvents

Excellent Adhesion to Concrete

Protects Against Corrosion

Easily Mixed and Dispensed

Applied Vertically or Horizontally

Moisture Insensitive

High Strength

Application Instructions

Surface should be prepared by using conventional cleaning methods. The surface should be free of loose materials, paints, sealants or oils. Use #20 solvent to remove oils and dirt.
Cut static mixer tip to second notch, making sure the opening is obstruction free. Remove cap and plugs from cartridge.
Place static mixer over cartridge and tighten nut. Load into dispensing gun.
Dispense and discard a bead of material until color is uniform before use.
Do not over or under mix. Blend components mechanically until streaking is eliminated. Dispense promptly after mixing.

Storage and Handling

Exposure to low temperatures will cause thickening and temporary cloudiness. This product should be stored and conditioned between 70-80º F (21-27º C) to assure optimum workability. Heating of the material is required to achieve original consistency. Do not expose closed containers to extreme heat. May rupture due to buildup of pressure. Call PRG, Inc. for instructions.

Disposal of Empty Container

Contact your state or local waste agency, or contact the United States Environment Protection Agency's RCRA Hotline. 1-800-424-9346

DANGER (corrosive)

May cause skin and eye burns. Harmful if swallowed or if absorbed through skin. May cause allergic skin and respiratory reaction. Do not get in eyes, skin or clothing. Avoid breathing vapor or mist. Keep container closed. Wash thoroughly after handling.

Performance Properties

Compressive Strength (ASTM D-695): 14,528 psi (min)

Compressive Modulus (ASTM D-695): 801,089 psi (min)

Tensil Strength (ASTM D-638): 9,759 psi (min)

Tensile Elongation (ASTM D-638): 1%

Linear Coefficient of Shrinkage (ASTM D-2566): .003

Heat Deflection (ASTM D-3418): 145ºF

Slant Shear (ASTM C-882 2 Days): 2180 (Type IV)

Slant Shear (ASTM C-882 14 Days): 2450 (Type IV), 1760 (Type V)

Gel Time @ 75ºF: 30 minutes

Pot Life @ 75ºF: 15 minutes

Cure Time @ 75ºF: 90 minutes