PRG, Inc. - Surveymaster SM PR3310

Moisture Monitoring Products

Borates

Cleaners &
Finish Removal

Scanning & Documentation

Protimeter Surveymaster SM

The dual mode pin and pinless moisture meter.

The Protimeter Surveymaster SM moisture meter combines the conventional two-pin inspection method, with a non-invasive radio frequency technique. This enables the user to assess the moisture condition not only on the surface, but also at depth quickly and non-destructively.

The Search Mode uses the same colour coded LED scale as the Measure mode, identifying degrees of dampness below the surface. There is also a user adjustable Audible Alarm that sounds to indicating the varying levels in moisture. In this mode the instrument employs radio frequency emissions (RFE) to measure moisture through most wall and floor coverings, including ceramic tiles.

The two-pin Measure Mode identifies by means of green, yellow and red LEDs whether a surface is in a safe i.e. air-dry, borderline or damp condition. The dampness measured is quantified on an LCD display to one decimal place in terms of % wood-moisture-equivalent (%WME).

While in the measure mode, the meter can be used with:

A two-pin head-and-lead for awkward corners and under work surfaces.

A set of ‘deep wall probes’ that are insulated but for their tips providing quantitative WME readings at depth, regardless of surface dampness and surface contamination by salts.

An optional Hammer Electrode (PR5010 or PR5000) for quick and easy measurement at depth of the moisture content of timber.

The instrument is supplied with pouch, moisture probe, deep wall probes, ‘calcheck’ and wood calibration table.

Specifications

Power 2 x AA

Pin Mode Range 8-100 WME/Relative

Search Mode Green, Yellow, Red, Relative

Auto Shut Off

Calibration Check

Pouch

Deep Wall Probes

Pin extension lead

Accessories