Your cart is empty

Crack Monitoring



Product Image Item Name- Price
Quick Set Adhesive (3.5 gm paste)(Box 100)

Quick Set Adhesive (3.5 gm paste)(Box 100)

Fast setting, dual-pouch (double/bubble) epoxy paste for mounting crack monitors. One unit per monitor.
$168.00

Add:

Quick Set Adhesive (3.5 gm paste)

Quick Set Adhesive (3.5 gm paste)

Fast setting, dual-pouch (double/bubble) epoxy paste for mounting crack monitors. One unit per monitor.
$1.95

Add:

Digital Calipers - Stainless Steel

Digital Calipers - Stainless Steel

$98.95

Add:

Digital Calipers - Carbon Fiber

Digital Calipers - Carbon Fiber

$39.95

Add:

Crack Width Gauge

Crack Width Gauge

Handy clear acrylic gauge measures crack widths from 0.1mm to 7.0mm (in 0.05mm increments) on one edge.  0 to 165mm ruler on other edge.
$16.00

Add:

Crack Points Stainless Steel (100)

Crack Points Stainless Steel (100)

Stainless Steel 1/4" round disks with dimple in center.  For use with calipers. (100)   Use with Digital Calipers Recording Sheet  
$39.95

Add:

Crack Monitor (Standing)

Crack Monitor (Standing)

A simple yet accurate device for monitoring movement in a crack (movement up/down/sideways on either side of crack)
$17.50

Add:

Crack Monitor (Rotating)

Crack Monitor (Rotating)

A smaller, more advanced device for monitoring cracks. 3.35" x 0.79" x 0.20" (85mm x 20mm x 5mm) Each Rotating Crack Monitor is...
$21.50

Add:

Crack Monitor (Flat)

Crack Monitor (Flat)

A simple yet accurate device for monitoring movement in a crack (change in crack width, movement up/down on either side of crack) 5.70" x...
$13.00

Add:

Crack Monitor (Corner)

Crack Monitor (Corner)

A simple yet accurate device for monitoring movement in a crack in corner of wall. (change in crack width, movement up/down on either side of crack)
$14.00

Add:



ROTATING CRACK MONITOR

More advanced flat crack monitor.

FLAT, CORNER, STANDING CRACK MONITORS


These are simple yet accurate devices for monitoring crack movement. The waterproof design permits use in salt water. Inexpensive devices with hot-stamped crosshairs and grid. These monitors consist of two acrylic plates which move independently. Each gauge comes with a graph for periodic recording of movement. Crack Monitors may be installed with Quick-set Epoxy.

MORE INFORMATION
 Installation and Specifications

CRACK WIDTH GAUGE


Handy clear acrylic gauge to measure crack widths from 0.1mm to 7.0mm (in 0.05mm increments)
Size:  17cm x 3cm (6-5/8" x 1-1/4")

CRACK POINTS


A crack point is a small metal disk with a dimple in the center.  When attached with epoxy to a surface, one on either side of a crack, they provide consistent points of reference for measuring with calipers.